Plans & Kits

An easy and inexpensive to build, 8 ft. sailing pram

SILVER 45 is a very classical small runabout capable of planing at full charge with a 25 to 40 HP outboard engine.

‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.Her length is that of two sheets of 8′ plywood and she’s built in two halves (bow end and stern end).

The Noank Pulling Boat is an 18′ x 36″ [5.5m x 91cm] sliding seat rowing boat suitable for open water travel.

Good dories have a reputation for being difficult to design but easy to build. Iain Oughtred has taken care of the hard work here-you can’t go wrong with his detailed plans for this lapstrake (plywood) Swampscott derivative.Construction: Glued lapstrake plywood over sawn frames.Alternative constr

Construction — Glued lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area — Lug 83 sq. ft. Sloop 95 sq. ft.

The Multi 5 is a multihull with a simple construction and good performance. The construction is extremely simplified by the drift absence. The good hulls volume allows to spend pleasant days and moving along the coasts with other friends, having the opportunity to carry up to four people.

This small dinghy can be used for fishing, pleasure rowing or as a tender for a bigger yacht. It can also be fitted with a small outboard motor. The boat has a relatively high freeboard and can take a fair amount of load. It handles very well small waves or wake caused by powerboats.

An oceangoing auxiliary cruiser featuring stout but simple carvel construction.

Construction: Carvel planked over steamed frames

Lofting is required

Plans include 5 sheets.

This 16 Talon is designed to give you more boat for less dollars! You will smile zooming over choppy waters with its smooth riding hull.