If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of Hal Kelly.Mia
Based loosely on the Folkboat, this plywood lapstrake double-ender combines comforting rough-water ability, and good looks.
Construction: Lapstrake plywood over laminated frames.
Alternative construction: Traditional plank on frame, strip or cold-molded.
Caprice is a Mini Offshore Cruiser for two.
Built with double sawn frames and strip plank, this little gaff cutter is designed for long term cruising.
Please note: this design was formerly known as Pike.
Construction - Glue-lap-plywood flat bottom.
Alternative construction - Traditional plank.
No Lofting required.
Plans include 3 sheets with instructions.
Sail Area - Sprit 60 sq. ft.
My client wanted to circumnavigate, Cape Horn and all! He wished to build the boat himself and had limited skills in boatbuilding, limits on his budget, and a space about the size of a double garage.
Wantoo is a foldable and trailerable proa with accommodation for 2 or 3 sailors. It is minimum weight (700 kilo), minimum costs (€ 24.000,-), maximum speed and maximum fun to sail.
Speed, good looks, and comfortable seating were the designer's main criteria for this double-ended centerboard daysailer.
Construction: Cold-molded over strip-planked inner skin.
Alternative construction: Strip, carvel planked (transom stern).
Lofting is required.
Length: 18 feet, Beam: 8.25 feet, draft: about 1 foot.
21’ long, 16’ beam (reduces to 8'5" for trailering), strip plank construction, 850lbs with all ge
I built this PT 11 nesting dinghy from the CLC kit over this past winter, to replace a 9'6" Nutsh
