Plans & Kits

Argie 15 plywood sailing dinghy

Kalostyn was designed as the subject matter of a book that I had planned to write called, How to design a boat using SketchUp 3D software.I created a design that had lots of curves in order to demonstrate how to put these curved forms into a 3D model, and then create and export the the f

Comfortable round-bottomed ocean cruiser with carvel-planking and accommodations for two.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required.

Plans include 9 sheets.

Kiska is a wood strip/epoxy single kayak. Based on Greenland kayak lines, this low volume kayak is playful but tracks well

LOA: 33′ 1″LBP: 32′10″LWL: 26′ 8″BEAM: 10′ 0″DRAFT: 2′ 3½″/5′ 3½″DISPLACEMENT: 9,000lbs (approx)BALLAST: 2,000lbs lead under the settees.1,000lbs additional lead for trim.SAIL AREA: 388 sq.

The TRICKY FIVE has been conceived for a precise scope: to realize a boat, which in relation to its size would maximize the ratio between speed and cost. This means that for a determined cost for materials and hours of construction required, it would be the fastest possible.

DIAPASON is a small cabin cruiser 7,50 m length. It is a modern, simple boat with racy lines, good performances and internal accommodations suitable for cruising.

The Wood Duck 10 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.

21′ 2″ Inboard/outboard runabout, built of marine plywood.Several design options include center console, outboard as well as inboard/outboard.And, configurations also include different heights for the windshield.Construction: Plywood.Lofting is required.Plans include 5 sheets.

TRAWLER YACHT 585