Sailboats - Daysailers
KIS 4.2S
We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders.
Before the advent of the outboard motor, rowing/sailing skiffs were common on Chesapeake Bay. They were used for crabbing, fishing, transporting goods, and enjoying summer evenings with a friend.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.
In the winter of 2012 a very good friend leant me an old copy of Nautical Quarterly. An article about Catboats caught my attention — I was and still am taken by their beautiful lines.I decided to design one with the aim of building it in the summer.
SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof.
LOA: 33′ 1″LBP: 32′10″LWL: 26′ 8″BEAM: 10′ 0″DRAFT: 2′ 3½″/5′ 3½″DISPLACEMENT: 9,000lbs (approx)BALLAST: 2,000lbs lead under the settees.1,000lbs additional lead for trim.SAIL AREA: 388 sq.
This small dinghy can be used for fishing, pleasure rowing or as a tender for a bigger yacht. It can also be fitted with a small outboard motor. The boat has a relatively high freeboard and can take a fair amount of load. It handles very well small waves or wake caused by powerboats.
This retro styled powerboat was designed for weekend cruisers and fishing, her semi displacement hull offer seaworthy and sea kindly performance, good speeds with modest horsepowers.
Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped
Built in Denmark (1930s-40s ?) Eric Salander design. Restoration Project.
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.