Plans & Kits

TRAWLER YACHT 585

The 16' Prospector features a flattened, shallow arch hull with its fullness carried into the bow and stern, good depth amidships to maintain freeboard and deepened ends to keep paddlers and gear dry.

The Sail kit allows you to transform the canoes NINFA, NAIADE and ONDINA, in small sailing trimarans for coastal cruising with minimal efforts.

TITICAT is a 9-meter sailing catamaran designed with a modern style for the transport of tourists and to build in strip planking. It was designed to sail on Lake Titicaca (Bolivia).

Janus is a 4 berth trailable sailing catamaran built in sheet plywood. However, don’t be deceived by Janus’ simple dory shaped hulls (which make it a very easy boat to build). It has a lot of internal room for its length and a surprisingly good performance.

Cutter designed by John Hyslop in 1876. An early combination of English and American ideas, PETREL was designed according to the wave form theory.You’ll receive 2 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.The pl

Kingfisher’ II is was developed directly from Kingfisher. Hull shape was modified with with flatten side line and reduced height. Other hull dimensions remain the same, width of 93 cm, flat bottom and slim shape gives good stability and maneuverability.

FREE plans — Holly Point Skiff, aka Holly Point Open Fisherman.It’s time we got back to the fuel efficient hull forms, and here’s one that will give the thrill of planing speeds, with the economy of a skiff.

V-bottomed single shell with sliding seat, outriggers and light plywood construction.

Construction: Plywood planking over bulkhead-type frames.

No lofting is required.

Plans include 4 sheets.

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.