Motorboats - Outboard
Albury Brothers Runabout
A fine outboard, smooth riding, seaworthy, and rugged. 40-120hp outboard.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
A fine outboard, smooth riding, seaworthy, and rugged. 40-120hp outboard.
A small and very simple tender to fit inside a station wagon or on a roofrack, this little plywood dink will suit some one wanting a tender for their small yacht or motorboat.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.
The CS-18 is an open interior design with the home builder in mind. It is designed for an above deck fuel tank and less aggressive flare in the bow. These features make this design an easier and faster build and at 18.5′, it will fit in most home garages.
This design came about when I got to thinking about having an elegant dinghy for our 34′ Topsail Ketch Sunrise.
Our best seller the 13 1/2 foot Bullet by Switzer. Iconic lines, the Bullet was a marathon and record breaker in its time.
Concept: The CCSF25 is a high performance offshore fishing and family boat, she has a classic running surface of 24 degree deadrise and 8.5' max beam. Wide chine flats for knocking down spray, integrated lifting strakes for high speed handling and directional control.
NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.
The Mill Creek 16.5 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck to create a wonderful high volume tandem kayak
Norwegian-influenced rowing/sailing craft designed for glued-lap plywood construction.
Constuction: Glued lapstrake plywood
No lofting is required.
Plans include 8 sheets.
$11,900 - Beautiful, reliable boat Complete restoration.
Nautilus is one of the best surviving examples of Ben Seaborn's design and the Blanchard Yard's c