If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Light and fast, a 20' tortured plywood, decked dayboat: both a double kayak and a single scull in one hull. Her 'midship' section is similar to Aleut kayaks.
The TRICKY FIVE has been conceived for a precise scope: to realize a boat, which in relation to its size would maximize the ratio between speed and cost. This means that for a determined cost for materials and hours of construction required, it would be the fastest possible.
The SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof. Maximum suggested power of the motor is 15/20 HP, which is sufficient for planing.
The Champlain is a good traditional style general purpose recreational canoe.
Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.
A new M80 has been launched in NL.
This tri was built by the ultimate wooden boat builder, Eef, a legend now 81 years has built several wooden multihulls is very happy with his new creation.
For more information on the M90, the M80 and M60 visit:
This plywood/epoxy construction 24 ft motor boat was designed specially for amateurs boat builders.Plans are available in metric and includes construction drawings and full size patterns CAD files.All CNC files are optimized to use standard plywood sheets of 2400 x 1200 mm and every panel have a
Simplicity of construction, user friendliness (both for single or double) and high performance – all of this with reasonable costs. These are the main priorities which lie at the base of the DP 14’ design and which justify the main choices made, in particular:
An inshore skiff for sails, oars, or electric propulsion.
A fast and able auxiliary cruiser with wheel steering and accommodations for three.
Construction: Carvel Planked over steamed frames.
Alternative construction: Cold-molded or strip.
Lofting is required.
Plans include 5 sheets.
NO MORE INQUIRIES - SPOKEN FOR NOVEMBER 2025
Own a beautiful and fast piece of nautical history.
