If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof.
As featured in WoodenBoat issue #274, the Tombolo 28 is an iconic modern classic outboard-powered cruiser. The mission of the design dictates a maximum length under 30′ and a trailerable beam.
The plans and construction manual for the plywood International 110 are available to any class member for use to build new or rebuild and restore an older boat.
"PocketShip" is a small cruising sailboat of refined model, meant to sail well on all points, provide dry camping accommodations for one or two adults, and tow behind a four-cylinder car.
The F1830 is the newest BYD design and the tandem version of the F1430 Sit On Top kayak. It is a second generation boat, with an optimized hull and simplified kit. This boat will easily carry 2 adults and a big cooler, or 2 adults and a couple of small kids.
A stitch and glue touring canoe design 14' x 30" [4.3 m x .76 m]
You can enjoy paddling easier and funnier with less budget because it’s made of plywood, sectional and you can build one in a week.
“Goldfish” is the slightly smaller version of our “Happy Hour” fishing kayak. Splicing of plywood sheets is not required as is the case with “Happy Hour”. All parts of the boat fit within the length of a standard sheet of 1/4″ (6mm) exterior grade plywood 8′x4′ (2.4x1.2m).
The Chaa Creek Expedition serves well for long distance tripping with heavy loads.
I bought the boat in 2012 from the original builder in Fairfield, Connecticut.
Custom built at Madisonville Maritime Museum. 2019 19' magic tilt galvanized trailer.
Custom row boat built by Brooks Boats in Mt. Desert, Maine.
El Toro one design in nice shape. Go sailing or refinish for a showpiece.
