If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
YOU can build your own 16 foot grand banks dory, from scratch, yourself using our step-by-step boat plans.
A versatile 4-metre open utility / runabout for river and inland lake use, built in taped-seam plywood.
An outboard skiff with a wide bottom and moderate rocker that contribute to stability and the ability to carry weight back aft.
Concept: The CCSF25 is a high performance offshore fishing and family boat, she has a classic running surface of 24 degree deadrise and 8.5' max beam. Wide chine flats for knocking down spray, integrated lifting strakes for high speed handling and directional control.
In the winter of 2012 a very good friend leant me an old copy of Nautical Quarterly. An article about Catboats caught my attention — I was and still am taken by their beautiful lines.I decided to design one with the aim of building it in the summer.
A low-power, moderate-speed inboard runabout for protected waters. Designed for sawn frames and batten-seam planking.Construction: Battened-seam planking over sawn frames. Lofting required. Plans include 5 sheets.Please note: the Westerbeke 26G engine spec’d in the plans is no longer manufactured
Here is another little skiff inspired by a Chesapeake Bay working craft.
Sharpie 31.5′ EGRETL.O.A.: 31′ 6 ½″SPARRED LENGTH: 35′ 6″L.W.L.: 26′ 3″BEAM: 8′ 6″DRAFT: 1′ 2 ¼″ /4′ 8″SAIL AREA : (Depends on rig)DISP.: 5,000# (approximate, for cruising)BALLAST: 1,500 lbs. lead, inside; additional to trim as needed.
This design was inspired by Ross Lillistone’s “Water Rat”. The bow transom was replaced by a pointed stem. Also the internal volume and from there the displacement of the boat were increased by about 20%. Changes were made to the seating arrangement as well.
The FireBug is a small sailboat or yacht that you can amateur build at home, sailing club or school, then learn to sail. It's easy to sail and will be the fastest boat on the bay. Low cost too!
My Girfriend and I built a Tango skiff and launched last fall its a great performing little skiif
My love for the water, history and craftsmanship drew me to build my own sailboat.
Fantastic, well cared-for boat built by Lowell’s Boat Shop in 2020—perfect for coastal adventures
