Oar / Paddle
Wood Duck 10 Hybrid
The Wood Duck 10 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The Wood Duck 10 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
A handy clipper-bowed centerboard yawl, this boat is a heavily built, smart sailor with sparten accommodations for two.
Construction: Carvel planked over steamed frames
Alternative construction: Cold-molded or strip
Lofting is required.
Plans include 6 sheets.
L.O.A. : 14'-9" - Beam 54"
For Rowing or Electric Outboard.
This schooner is designed to be able to cruise offshore with a crew of four people.
Here heavy displacement and built down hull will make for a comfortable motion
Good speed and sea keeping ability with low impact & noise. 50hp outboard or inboard diesel.
This boat, with a LOA of 8 mt,develops an internal volume such as to allow 6 crew members a sailing cruise.The hull lines and deck lines are to corner for simplicity of construction, and are harmonized with the hull volume.
Attention Amateur and Professional Boat Builders!Bayside Marine Design has stock electrical plans for your boat project. All of the information and schematics you need to wire a new boat or re-wire an existing boat are in the package.
Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.This design differs from those of the period in that it is to be constructed in the 'Instant Boat' method using glass fiber and polyester or epoxy resins to make
This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been some adjustments to take care of this.
All hardware original, complete set Harken blocks. Mast, boom cuddy bars and tent.
$11,900 - Beautiful, reliable boat Complete restoration.