Sponge Docks Skiff 16
This is the 16ft version of the Sponge Docks Skiff Serie, built in wood/epoxy, specifically Meranti Hydrotec. She has a side console and a new Suzuki 40hp which got her up to 32mph.
This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers. If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here. (All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
This is the 16ft version of the Sponge Docks Skiff Serie, built in wood/epoxy, specifically Meranti Hydrotec. She has a side console and a new Suzuki 40hp which got her up to 32mph.
Built from just a single sheet of plywood, this Puddle Boat designed by William Garden got plenty of attention from Denney Freeston's grandchildren this summer.
Bob Elliott led seven students in the construction of this Merrimack Skiff built at Lowell's Boat Shop, Amesbury, Massachusetts during the winter of 2001. with a length of 13'3" and a beam of 2'6", the skiff is built of agathis planks riveted over sawn oak frames.
Warren Kennedy launched his new 14' Amesbury Skiff made by Lowell's Boat Shop in Amesbury Mass. He wanted the boat over built, and says it handles great in both salt and fresh water. He uses a 15 hp four-stroke Yamaha for propulsion.
Richard Hudak, of Hilo, Hawaii, built this gleaming canoe from sugi cedar. He cut the tree down and milled the wood himself. He made the paddle from koa wood. This photograph was taken on New Year's Eve at Reeds Bay on the Big Island in Hawaii.
Flossie is, essentially, a New Haven Sharpie. She has been modified for use as a canal boat. 49' loa 11.5' beam 2.5' draft 16,500 disp.. Her chines have been truncated to provide a flat surface lying alongside a straight bank.
I began to build the Annapolis Wherry (named SOLACE) during the WoodenBoat School class at Chesapeake Light Craft during the week beginning April 8th, 2013. Rowed for the first time on November 2, 2013.
Rich Gaito is seen here sailing JAYLENE KERR off Merchant Island, just south of Stonington, Maine. JAYLENE KERR is a Joel White Shearwater design (16' x 53" beam) that Rich built during the winter of 2001-2002. He used plywood lap construction on laminated frames.
In Pawaukee, Wisconsin, Ric Sternkopf designed and built these two stand-up paddleboards and launched them last April. The boards are 18′ long, 26″ wide, and weigh 38 lbs. They are made of stitch-and-glued 3mm okoume and sapele plywood.
A Dudley Dix designed Cape Henry 21′ that I recently built and launched for a Paris based customer. 3/8″ Okoume ply over ply bulkheads and Southern Yellow pine stringers, sheathed with 4oz glass on the bottom up to the first lap.
Complete with spars and sails. Lying Cape Cod. Last restored c1970. Cockpit and deck are newer.
Lord Nelson Royal Navy 1798 pattern Pinnace. Pine on oak. Length 28.5 feet. Needs few repairs.