Plans & Kits

singlehanded skiff

- Trawler Yachts & Work Boats

This exquisite launch leaves little wake at five knots. Her plans show both cold-molded and plank-on-frame construction. Construction: Cold-Molded or Carvel planked over steamed frames. Alternative construction: Lapstrake. Lofting is required. Plans include 5 sheets.

An entry-level sliding-seat pulling boat. Provides rewarding speed in an easily built hull with enough stability to keep a beginner out of trouble. Construction: Plywood. No lofting is required. Plans include 5 sheets.

Jolly Boat is a rocking toy boat designed to provide years of make-believe nautical adventure for the young sailor, It is an adaptation of the classic flatiron skiff, a type that generations of “old salts” remember fondly as their first “real” boat.Jolly Boat has a length of 48″ and a beam of 23″

Simon found an older version of this boat back in the eighties and realized that its thousand-year-old design could be copied and preserved without too much difficulty. He measured it out in ’89 and Bill Nielsen lofted it and drew up the plans in ’91.

The cradle boat Baby Tender is an adaptation of the classic yacht tender carried aboard many of the finest yachts during the time when wooden boatbuilding was truly an art. The boat has a length of 45 in. and a beam of 22 in.

Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two

Digger 17 is a classic form of flats skiff, seen working along every shore. Designed for modest power, she can get into the shallowest water and carry a hefty load.

Kingfisher’ II is was developed directly from Kingfisher. Hull shape was modified with with flatten side line and reduced height. Other hull dimensions remain the same, width of 93 cm, flat bottom and slim shape gives good stability and maneuverability.