Plans & Kits

ROBERTS 470 - WOOD EPOXY

Rugged, simple, stable, and economical to build, the Lumber Yard skiffs are based on traditional New England flat bottom work skiffs.

Wynfall is a small but capable cruising boat -- although only 26' long, she has a waterline of almost 24', and displaces 9500 lbs.

Construction: Glued lapstrake plywood. Alternative construction: Traditional planking, cold molded, strip plank, epoxy-fiberglass. No Lofting required. Plans include 5 sheets.

These handsome, practical row boats were routinely built by Nova Scotia shipwright, Jim Smith in six days, painted and ready for the water.

A great family boatbuilding project! Build it in a weekend from a kit, or build it from plans using local materials.

The M-Yak 500 is a sleek and fast sit-on-top kayak for one or two paddlers that can easily built in stitch-and-glue.The 4′-2″ long open cockpit offers enough space for two average sized paddlers.

A quickly, easily and inexpensively built solo canoe, that can be built by one person with hand tools in three days. Complete plans and step-by-step instructions. A great family boatbuilding project.

Round-bottomed pocket cruiser with room for an inboard auxiliary and accommodations for two.

Construction: Carvel planked over steamed frames.

Alternative construction: Cold-molded or strip

Lofting is required.

Plans include 11 sheets.

Designed for a boat owner who wanted a rigid tender for his 24’ meter yacht, PRAM 220 has the minimum dimensions to be used at this scope. It may be used by children for sailing in protected waters.