If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Construction: Glued lapstrake clinker plywood. Alternative construction: Traditional plank, cold molded and strip plank.
Sail Area: Lug 62 sq. ft.
Gunter sloop 72 sq. ft.
No Lofting required.
Plans include 6 sheets.
Cape Henry 21 lapstrake plywood trailer sailer
The input was “design a pure cruising boat”.The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.The hull lines have been developed both to corner and round.We wanted to realize something new for deck design.
Traditional "Whitehall" elegance in a stitch-and-glue kit. For casual single and tandem rowing, we do not believe there is a better build-your-own-boat kit than the Chester Yawl.
The M-Yak 500 is a sleek and fast sit-on-top kayak for one or two paddlers that can easily built in stitch-and-glue.The 4′-2″ long open cockpit offers enough space for two average sized paddlers.
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
The idea behind this design was to see how much boat can be squeezed out of a single sheet of plywood 4x8′ (1220 x 2440mm). The resulting boat is suitable for kids to paddle on ponds or very small lakes.
Round-bottomed pocket cruiser with room for an inboard auxiliary and accommodations for two.
Construction: Carvel planked over steamed frames.
Alternative construction: Cold-molded or strip
Lofting is required.
Plans include 11 sheets.
We illustrate the spiritual and sociological reasons that led us to state in the MOSCHINO the ideal boat for many of us.
The Mini Vee is a simple-to-build v-bottom racing boat designed for APBA Mini GT and GT Pro racing. Also an excellent high-performance boat for the non-racer and a great boat building project for an individual or the whole family.
Length: 18 feet, Beam: 8.25 feet, draft: about 1 foot.
21’ long, 16’ beam (reduces to 8'5" for trailering), strip plank construction, 850lbs with all ge
I built this PT 11 nesting dinghy from the CLC kit over this past winter, to replace a 9'6" Nutsh
