CLC Cradle Boat
A perfect gift for the family's newest little boatbuilder, the CLC Cradle Boat is an ideal first stitch-and-glue project.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
A perfect gift for the family's newest little boatbuilder, the CLC Cradle Boat is an ideal first stitch-and-glue project.
The project of Acyd 950 was born on the regulation of “class 950”.These boats have an extremely light weight and high performance and they can safely be used on a cruise.The remarkable minimum lightness is only 2700kg and it is compensated by the strong bulb elongation that carries the maximum dr
The Tolman Skiff has a Dory heritage with a “V” bottom and was designed to handle the inland and open waters of Alaska and is a very capable ocean skiff.
The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
LOA: 33′ 1″LBP: 32′10″LWL: 26′ 8″BEAM: 10′ 0″DRAFT: 2′ 3½″/5′ 3½″DISPLACEMENT: 9,000lbs (approx)BALLAST: 2,000lbs lead under the settees.1,000lbs additional lead for trim.SAIL AREA: 388 sq.
SILVER 45 is a very classical small runabout capable of planing at full charge with a 25 to 40 HP outboard engine.
Lapstrake-plywood daysailer with a shapely wineglass transom, unstayed sprit rig, and wide, flat, keels for easy trailering.
Construction: Lapstrake plywood planking over steam-bent frames.
Alternative construction: Cold-molded or strip.
No lofting is required.
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
600 Lion Yacht project despite its small size, has a spacious interior, and allows you to comfortably make trips to the inland waters and coastal seas.
Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.This design differs from those of the period in that it is to be constructed in the 'Instant Boat' method using glass fiber and polyester or epoxy resins to make
Complete with spars and sails. Lying Cape Cod. Last restored c1970. Cockpit and deck are newer.
Lord Nelson Royal Navy 1798 pattern Pinnace. Pine on oak. Length 28.5 feet. Needs few repairs.